Download Brochure

Whenever space is the limiting factor in designing Acoustic Treatment system, ISTIQ Acoustic Louvers are the best bet to solving the problem. Serving a dual functions - reducing the noise and at the same time performs as weather louvers, ISTIQ Louvers is easy to install.

Aesthetically pleasing, they consist of fabricated metal louver blades with acoustic infill, alternated with air gaps and fitted into a four sided metal case.

APPLICATIONS

Because of their excellent noise reduction capability, ISTIQ Acoustic Louvres can be used in almost any situation which need to control the noise but at the same time must permit the flow of air. The modular design and wide range of sizes and finishes allows them to be used in most industrial or commercial projects. They are ideal for use in any of the following applications:

•     Plant room ventilation
•     Air conditioning plants
•     Power stations
•     Cooling towers
•     Diesel generator sets Canopy
•     Refrigeration plants
•     Pump Houses
•     Ventilation exhaust plenum chambers

FEATURES

ISTIQ Acoustic Louvres come in two models - Model Lx and Model Ly. Each model offers of two different length, 300mm and 600mm. The maximum single unit available is 2400mm width and 2400mm in height. If a bigger size is required, it can be done through combination of modules.

Model Lx This model has a special designed, low profile blades, at a pitch of 150mm and at an angle of 35 degrees. As such, the design prevents line-of-sight through the Louvre, resulting in an enhanced high frequency acoustic performance and an extremely low pressure drop.

Model Ly Where else in this model, the specially designed blades are set at a pitch of 300mm and thus, provide a superior low frequency acoustic performance in the critical 125 Hz and 250 Hz octave bands.

CONSTRUCTION

ISTIQ Acoustic Louvres consist of fabricated metal blades with acoustic infill placed internally. The open area between each blade has been carefully designed to gain maximum acoustic performance and minimum airflow resistance. The casings are fabricated from galvanised iron or mild steel and have folded flanges both at the front and back. This design provides extra rigidity and the means for fixing the louvre blades in position. A bird guard, manufactured from 25mm square galvanized wire, can be supplied fitted to the rear face of all models, if required.