Acoustic Modular Panels

CONSTRUCTION

ISTIQ Acoustic Enclosures are made of from high quality galvanized steel and perforated sheet. In between, acoustic infill (rockwool or fibre glass) is used to absorb noise. The thickness of these panels are available in 50 mm, 75mm and 100 mm. Different acoustic infill and different thickness of metal sheet are used depending on the application to ensure excellent performance and cost effectiveness without sacrificing quality. Specific percentage of perforation of galvanized sheets, which hold the infill, is specially selected to give the optimum overall noise absorption coefficient. Alternatively, materials such as zincanneal, mild steal or stainless steel can also be used to replace galvanized steel. For finishing, powder coating system is highly recommended. The painting system, thus can last up to 20 years depending on the type of powder coating to be used.

APPLICATIONS

ISTIQ Acoustic Modular Panels System is one of the most effective means for containment of excessive noise and for isolation of workers from the noise. Even where silencers are used, these can treat only the air-borne noise. The treatment of mechanical noise from the blower, motor etc. is beyond the scope of the silencer. Thus, in order to achieve low noise levels that are often specified, noise enclosures are often required. By using ISTIQ Acoustic Modular Panels, acoustic enclosure can be designed acoustically to give the required noise attenuation. The unique interlocking system (male/female) provides a good seals without having any rubber or gasket thus, give the maximum transmission loss. A well designed enclosure can help reduce the noise to a specified noise limits.

Typical application can be applied on the following equipments: